Komatsu D375A-6 Fender Wiring Harness
Fender Wiring Harness for Komatsu D375A-6, OEM Quality Replacement Part #195-06-57541
Fitment
Fits the Komatsu D375A-6. ECS lists 11 harness sections for this machine — see all 11 sections for the Komatsu D375A-6 before you order, because the sections are not interchangeable.
Part number reference for the 195-06-57541
This harness is one part sold under one number. Suppliers and parts books write it differently — you may see it as 195-06-57541, 1950657541. They are all the same part; the number on the tag of your old harness is what settles the order.
If the tag shows a different number entirely, do not order by eye — send us a photo of it on WhatsApp and we will match it against the catalogue before anything ships.
Where this harness sits on the Komatsu D375A-6
It runs along the frame between the front and rear of the machine, clipped to the structure and passing articulation or steering joints.
What it connects
- Front structure to rear structure — the electrical link across the middle of the machine.
- Frame-mounted components to the cab and engine — the circuits that do not run through the main loom.
What a failing Komatsu D375A-6 harness looks like
| What the operator reports | Why the harness fits that symptom |
|---|---|
| Functions lost when the machine articulates or steers | A run that is being pulled apart at a joint. |
| Faults after rough ground | Clip missing, loom rubbing the frame. |
| Corrosion at the frame connectors | Water trapped in a low point of the loom. |
These are circuit-level symptoms, not a diagnosis. The same behaviour can come from a sensor, an ECM input or a mechanical fault — the checks below are how you tell them apart.
How to confirm it is the harness before you buy
- Compare the part number on the old harness. The number is printed on a tag or moulded into the main connector body. If it does not match, stop — stop here and send us a photo, because two sections of the same machine are not interchangeable.
- Resistance test the suspect run. Disconnect both ends and measure end to end. A reading that is far above the others in the same loom means broken strands; a reading to ground means chafing.
- Wiggle test under load. Back-probe the circuit with the machine running and flex the loom by hand along its length, especially at clips and at the cab or boom entry. If the meter or the fault jumps, you have found the run.
Other harness sections for the Komatsu D375A-6
Same type of harness on other machines
Product Description
High-quality fender wiring harness designed for Komatsu D375A-6. This is a complete replacement harness that matches OEM specifications (Part #195-06-57541). All connectors and wiring are tested before shipping. Direct fit installation, no modification required. Made with durable copper wires and heat-resistant insulation for long service life in heavy-duty applications. Factory direct pricing with quality guarantee.
Why Choose ECS System Parts?
- Factory Direct: we build the loom — no middlemen
- In Stock Ready to Ship: most orders leave within 24 hours
- OEM Quality: made to the original drawing, connector for connector
- 1 Year Warranty: full coverage against defects
- Worldwide Shipping: DHL, FedEx, UPS, EMS
- Expert Support: WhatsApp +86-13714733803 — send us a photo of your old harness and we will confirm the section
Technical Specifications
| OEM Part Number | 195-06-57541 |
|---|---|
| Compatible Model | Komatsu D375A-6 |
| Harness Type | Fender Wiring Harness |
| Warranty | 12 Months |
Shipping Information
- DHL / FedEx / UPS / EMS worldwide
- Ships within 24 hours
- 3-7 days express, 7-15 days standard
- Tracking number provided
Return Policy
- 30-day return window
- Must be unused, original packaging
- Contact via WhatsApp for RMA authorization