E ECSSystemParts
Wiring Harness · Kobelco 350-9 Engine Aftertreatment Harness

Kobelco 350-9 Engine Aftertreatment Wiring Harness

OEM Part #: VH82121-E1N70
Brand: Kobelco
Fits: Kobelco 350-9 Excavator
Availability: ✅ In Stock (5)
$90.00

Engine Aftertreatment Wiring Harness for Kobelco 350-9 excavator. OEM quality replacement. Direct fit, tested before shipping.

Not 100% sure this fits? WhatsApp us the part number or a photo of your old harness tag — we confirm before you order. No charge, no obligation.
Prefer email or phone? sales@ecssystemparts.com  ·  +86 137 1473 3803
We reply within 24 hours, Monday–Saturday. Send the part number or a photo of your old harness tag — we confirm fitment before you pay.
✅ In Stock Ready to Ship 🚚 Ships Within 24 Hours 🛡️ 1 Year Warranty ↩️ 30-Day Returns ⭐ OEM Quality Replacement
Kobelco350-9engine aftertreatment wiring harnessexcavator partsVH82121-E1N70

Fitment

Fits the Kobelco 350-9 Excavator. This is the only section ECS currently lists for this machine, so confirm the part number on your old harness against VH82121-E1N70 before ordering.

Machine: Kobelco 350-9 Section: Kobelco 350-9 Engine Aftertreatment Harness OEM: VH82121-E1N70 Brand: Kobelco

Part number reference for the VH82121-E1N70

This harness is one part sold under one number. Suppliers and parts books write it differently — you may see it as VH82121-E1N70, VH82121E1N70. They are all the same part; the number on the tag of your old harness is what settles the order.

If the tag shows a different number entirely, do not order by eye — send us a photo of it on WhatsApp and we will match it against the catalogue before anything ships.

Where this harness sits on the Kobelco 350-9

It runs from the aftertreatment unit — DPF, SCR or DOC — back to the engine ECM, along the frame or the engine bay, close to high heat.

What it connects

  • ECM to the dosing and regeneration controls — the commands that start and stop regeneration and dosing.
  • Temperature and pressure sensors back to the ECM — the inputs the ECM uses to decide whether regeneration is safe.

What a failing Kobelco 350-9 harness looks like

What the operator reportsWhy the harness fits that symptom
Regeneration will not startA temperature or pressure input the ECM does not trust.
Derate or limp after a regen attemptThe ECM protecting the system when an input drops out.
Aftertreatment codes with a good sensorThe run, especially where it passes near the exhaust.
Fault only when hotInsulation breaking down with temperature.

These are circuit-level symptoms, not a diagnosis. The same behaviour can come from a sensor, an ECM input or a mechanical fault — the checks below are how you tell them apart.

How to confirm it is the harness before you buy

  1. Compare the part number on the old harness. The number is printed on a tag or moulded into the main connector body. If it does not match, stop — stop here and send us a photo, because two sections of the same machine are not interchangeable.
  2. Resistance test the suspect run. Disconnect both ends and measure end to end. A reading that is far above the others in the same loom means broken strands; a reading to ground means chafing.
  3. Wiggle test under load. Back-probe the circuit with the machine running and flex the loom by hand along its length, especially at clips and at the cab or boom entry. If the meter or the fault jumps, you have found the run.

Other harness sections for the Kobelco 350-9

Same type of harness on other machines

Description
Specifications
Shipping & Returns

Product Description

High-quality engine aftertreatment wiring harness designed for Kobelco 350-9 excavator. This is a complete replacement harness that matches OEM specifications. All connectors and wiring are tested before shipping. Direct fit installation, no modification required. Made with durable copper wires and heat-resistant insulation for long service life in heavy-duty applications. Factory direct pricing with quality guarantee.

Why Choose ECS System Parts?

  • Factory Direct: we build the loom — no middlemen
  • In Stock Ready to Ship: most orders leave within 24 hours
  • OEM Quality: made to the original drawing, connector for connector
  • 1 Year Warranty: full coverage against defects
  • Worldwide Shipping: DHL, FedEx, UPS, EMS
  • Expert Support: WhatsApp +86-13714733803 — send us a photo of your old harness and we will confirm the section

Technical Specifications

OEM Part NumberVH82121-E1N70
Compatible ModelKobelco 350-9 Excavator
Harness TypeEngine Aftertreatment
Warranty1 Year

Shipping Information

  • DHL / FedEx / UPS / EMS worldwide
  • Ships within 24 hours
  • 3-7 days express, 7-15 days standard
  • Tracking number provided

Return Policy

  • 30-day return window
  • Must be unused, original packaging
  • Contact via WhatsApp for RMA authorization