JCB 4CX Transmission Wiring Harness
Transmission Wiring Harness for JCB 4CX backhoe loader. OEM quality replacement. Direct fit, tested before shipping.
We reply within 24 hours, Monday–Saturday. Send the part number or a photo of your old harness tag — we confirm fitment before you pay.
Fitment
Fits the JCB 4CX Backhoe Loader. This is the only section ECS currently lists for this machine, so confirm the part number on your old harness against 72111680 before ordering.
Where this harness sits on the JCB 4CX
It runs from the transmission control valve and speed sensors up to the ECM or the transmission controller.
What it connects
- Controller to the shift solenoids — the commands that select gear and clutch packs.
- Speed and pressure sensors to the controller — the inputs the controller shifts on.
What a failing JCB 4CX harness looks like
| What the operator reports | Why the harness fits that symptom |
|---|---|
| Limp mode or a single gear only | A solenoid circuit the controller can no longer see. |
| Harsh or late shifting | A pressure or speed signal that is drifting. |
| Speed sensor codes | The run to the sensor, not necessarily the sensor. |
| Fault clears when cold, returns when hot | Resistance rising with temperature. |
These are circuit-level symptoms, not a diagnosis. The same behaviour can come from a sensor, an ECM input or a mechanical fault — the checks below are how you tell them apart.
How to confirm it is the harness before you buy
- Compare the part number on the old harness. The number is printed on a tag or moulded into the main connector body. If it does not match, stop — stop here and send us a photo, because two sections of the same machine are not interchangeable.
- Resistance test the suspect run. Disconnect both ends and measure end to end. A reading that is far above the others in the same loom means broken strands; a reading to ground means chafing.
- Wiggle test under load. Back-probe the circuit with the machine running and flex the loom by hand along its length, especially at clips and at the cab or boom entry. If the meter or the fault jumps, you have found the run.
Other harness sections for the JCB 4CX
Same type of harness on other machines
Product Description
High-quality transmission wiring harness designed for JCB 4CX backhoe loader. This is a complete replacement harness that matches OEM specifications. All connectors and wiring are tested before shipping. Direct fit installation, no modification required. Made with durable copper wires and heat-resistant insulation for long service life in heavy-duty applications. Factory direct pricing with quality guarantee.
Why Choose ECS System Parts?
- Factory Direct: we build the loom — no middlemen
- In Stock Ready to Ship: most orders leave within 24 hours
- OEM Quality: made to the original drawing, connector for connector
- 1 Year Warranty: full coverage against defects
- Worldwide Shipping: DHL, FedEx, UPS, EMS
- Expert Support: WhatsApp +86-13714733803 — send us a photo of your old harness and we will confirm the section
Technical Specifications
| OEM Part Number | 72111680 |
|---|---|
| Compatible Model | JCB 4CX Backhoe Loader |
| Harness Type | Transmission |
| Warranty | 1 Year |
Shipping Information
- DHL / FedEx / UPS / EMS worldwide
- Ships within 24 hours
- 3-7 days express, 7-15 days standard
- Tracking number provided
Return Policy
- 30-day return window
- Must be unused, original packaging
- Contact via WhatsApp for RMA authorization