E ECSSystemParts
Wiring Harness · Doosan DX200A-7M Ignition Switch Harness

Doosan DX200A-7M Ignition Switch Wiring

OEM Part #: 310207-01182A
Brand: Doosan
Fits: Doosan DX200A-7M Excavator
Availability: ✅ In Stock (5)
$72.00

Ignition Switch Wiring for Doosan DX200A-7M excavator. OEM quality replacement. Direct fit, tested before shipping.

Not 100% sure this fits? WhatsApp us the part number or a photo of your old harness tag — we confirm before you order. No charge, no obligation.
Prefer email or phone? sales@ecssystemparts.com  ·  +86 137 1473 3803
We reply within 24 hours, Monday–Saturday. Send the part number or a photo of your old harness tag — we confirm fitment before you pay.
✅ In Stock Ready to Ship 🚚 Ships Within 24 Hours 🛡️ 1 Year Warranty ↩️ 30-Day Returns ⭐ OEM Quality Replacement
DoosanDX200A-7Mignition switch wiringexcavator parts310207-01182A

Fitment

Fits the Doosan DX200A-7M Excavator. ECS lists 5 harness sections for this machine — see all 5 sections for the Doosan DX200A-7M before you order, because the sections are not interchangeable.

Machine: Doosan DX200A-7M Section: Doosan DX200A-7M Ignition Switch Harness OEM: 310207-01182A Brand: Doosan

Part number reference for the 310207-01182A

This harness is one part sold under one number. Suppliers and parts books write it differently — you may see it as 310207-01182A, 31020701182A. They are all the same part; the number on the tag of your old harness is what settles the order.

If the tag shows a different number entirely, do not order by eye — send us a photo of it on WhatsApp and we will match it against the catalogue before anything ships.

Where this harness sits on the Doosan DX200A-7M

It sits inside the cab, behind the trim, feeding the instruments and controls the operator sees and touches.

What it connects

  • Panel instruments to the machine harness — gauges, hour meter, warning lamps and the switches beside them.
  • Cab accessories to power and ground — radio, horn, interior lighting, 12/24 V outlets, camera and GPS.

What a failing Doosan DX200A-7M harness looks like

What the operator reportsWhy the harness fits that symptom
One instrument or accessory deadA branch behind the trim, not the instrument itself.
Gauge reads wrong but the sender is goodThe run between sender and gauge.
Interior light or horn works only sometimesA connector behind the panel losing tension.
Fault after trim or radio workA run disturbed during the job.

These are circuit-level symptoms, not a diagnosis. The same behaviour can come from a sensor, an ECM input or a mechanical fault — the checks below are how you tell them apart.

How to confirm it is the harness before you buy

  1. Compare the part number on the old harness. The number is printed on a tag or moulded into the main connector body. If it does not match, stop — stop here and send us a photo, because two sections of the same machine are not interchangeable.
  2. Resistance test the suspect run. Disconnect both ends and measure end to end. A reading that is far above the others in the same loom means broken strands; a reading to ground means chafing.
  3. Wiggle test under load. Back-probe the circuit with the machine running and flex the loom by hand along its length, especially at clips and at the cab or boom entry. If the meter or the fault jumps, you have found the run.

Where this part sits in the Doosan DX200A-7M range

ECS lists 2 harnesses in this section group for this machine. At $72.00 the 310207-01182A is the cheapest, against a range of $72.00 to $449.00. Stock on hand: 5.

The closest part in price is 310207-03191L at $449.00 — $377.00 apart. The two are separate looms; the tag on your old harness settles which one you need.

We photographed this exact unit: 4 images on this page are of the 310207-01182A we have in stock, not a catalogue picture. Price tracks section size and how much of the loom is enclosed, not condition — every part we list is new build.

Other harness sections for the Doosan DX200A-7M

All 5 harness sections for the Doosan DX200A-7M →

Same type of harness on other machines

Description
Specifications
Shipping & Returns

Product Description

High-quality ignition switch wiring designed for Doosan DX200A-7M excavator. This is a complete replacement harness that matches OEM specifications. All connectors and wiring are tested before shipping. Direct fit installation, no modification required. Made with durable copper wires and heat-resistant insulation for long service life in heavy-duty applications. Factory direct pricing with quality guarantee.

Why Choose ECS System Parts?

  • Factory Direct: we build the loom — no middlemen
  • In Stock Ready to Ship: most orders leave within 24 hours
  • OEM Quality: made to the original drawing, connector for connector
  • 1 Year Warranty: full coverage against defects
  • Worldwide Shipping: DHL, FedEx, UPS, EMS
  • Expert Support: WhatsApp +86-13714733803 — send us a photo of your old harness and we will confirm the section

Technical Specifications

OEM Part Number310207-01182A
Compatible ModelDoosan DX200A-7M Excavator
Harness TypeIgnition Switch
Warranty1 Year

Shipping Information

  • DHL / FedEx / UPS / EMS worldwide
  • Ships within 24 hours
  • 3-7 days express, 7-15 days standard
  • Tracking number provided

Return Policy

  • 30-day return window
  • Must be unused, original packaging
  • Contact via WhatsApp for RMA authorization