Caterpillar 345D Wiring Harness — All 3 Sections
The Caterpillar 345D uses 3 separate harness sections that ECS builds. They are not interchangeable: the part number on your old loom decides which one you need. Below they are grouped by where each section sits on the machine, with the part numbers and the symptoms that point to each group.
Which section do I actually need?
Start from the fault, not from the part name. Find the symptom the operator reports, then open that group.
| Section | First symptom to look for | Group |
|---|---|---|
| External Harness | Several circuits dead after rain or a wash | External Harness group |
| Fuse Box Harness | The same fuse blows repeatedly | Fuse Box Harness group |
| Valve Control Harness | One function slow or dead, others normal | Valve Control Harness group |
External Harness 1 part
It is the outside harness on the machine body — exposed to rain, wash-down, mud and UV. On most machines it is the section most often replaced.
| Part # | Description | Price | Stock |
|---|---|---|---|
| 442-8369 | External Wiring Harness | $2321.00 | In stock |
Fuse Box Harness 1 part
It sits in or immediately behind the fuse and relay box, where battery power is split into the individual circuits.
| Part # | Description | Price | Stock |
|---|---|---|---|
| 319-0873 | Fuse Box Wiring Harness | $1042.00 | In stock |
Valve Control Harness 1 part
It runs from the control valve block on the frame up to the ECM or the machine controller, clipped along the boom or the frame as it goes.
| Part # | Description | Price | Stock |
|---|---|---|---|
| 291-7804 | Control Valve Wiring Harness | $164.00 | In stock |
Not sure which of the 3 sections is yours?
Send a photo of the tag on your old harness to WhatsApp +86-13714733803 and we will confirm the part number against this list before you order. Getting the section wrong is the most common reason a replacement does not fit.